Delightful Wishes meets Textured Notes

 Welcome to my blog

and  thank you for joining me today!

Happy Birthday Jean

The ribbon technique came from Terri Ganes.

Intermediate level - die cutting, dry embossing, layering. paper ribbon technique , stamping, two step stamping

Materials required for this card are:

 

Card Stock: basic white, fresh freesia, pecan pie

Designer Series Paper: *flight & airy

Dies: textured notes (4)

Embossing Folders: beautiful patterns 3D, *subtle 3D

Ink: bubble bath, fresh freesia, soft sea foam

 * = no longer available, when using layering dies (1) is the smallest

Start with a basic card base 14.5 x 21 scored at 10.5, white 14.5 x 10.5, 14 x 4.5, 11 x 6, 11.5 x 5, 10 x 5, pecan pie 12.5 x 4.5, fresh freesia 10 x 5, 2 x 9.5, dsp 2 strips of each colour 1 x 30

1. emboss the 14.5 x 10.5 piece using the beautiful patterns 3D folder and adhere to the base card using liquid glue
2. taking the white piece 14 x 4.5 score lines every 2cm across the long length and put to one side
3. Using the 11 x 6 die cut the rectangle and emboss using  the subtle 3D folder
4. use the 11 x 5 to carry out the 2 step stamping of the flowers and 1 step for the leaves (3 needed) then die cut the pieces
5. add adhesive sheeting to the back of the 10 x 5 piece then die cut the thin wishing die
6. add adhesive sheeting to the back of the fresh freesia 10 x 5 piece then die cut the wider wishing die
7. add adhesive sheeting to the back of the pecan pie 12.5 x 4.5  piece then die cut the branches
8. stamp the sentiment using the fresh freesia 9.5 x 2 and die cut
9. cut the stripes of dsp to 5.5 long and adhere to the scored card using stampin' seal' in a diagonal fashion using the scored lines as guide
10. adhere this piece to the base card about 1cm in from the left edge using liquid glue 
11. cut down the branches to fit the rectangle, remvoe the backing from the branches and adhere to the rectangle
12. attach the rectangle to the base card using a combination of dimensional pads on the right side and liquid glue on the left side 
13. remove the backing from the white wishing and layer onto the pink one
14. now remove the backing from the pink wishes and adhere to the base card
15. arrange the flowers and leaves then adhere using liquid glue
16. attach the sentiment using dimensional pads

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me. I'd love to hear form you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊 

Pop up Petals - A card on top of a card

 Welcome to my blog

and  thank you for joining me today!

Happy birthday Margaret

Card front

first page

second page is blank for you to put note or greeting

Intermediate level - blending with markers, die cutting, layering, stamping

Materials required for this card are:

 

Bundles: delightful wishes, pop up petals

Card Stock: basic white, cloud cover, petunia pop

Designer Series Paper: florals in bloom, whispers of texture

Dies: *cheerful daisies 

Ink: memento black, petunia pop

Stampin' Blends: petunia pop, shy shamrock

Stamps: spotlight on nature

Accessories: adhesive sheets, muted palette dots

* = no longer available

Start with a whispers of texture base 14.5 x 21 scored at 10.5, florals in bloom 14 x 20 scored @ 10, 14 x 10 (top layer to hide the gap) basic white 7 x 10 (3 flowers), 10 x 1.8 (front wishing), 7 x 3 (middle sentiment), 4.5 x 10 (wishing), cloud cover 6.5 x 1.5 (ledges), petunia pop 6 x 9 (wishing background), dsp squares 2.5 x 2.5 (2 needed)

1. using the centre score line of the patterned dsp, die cut the opening for the boxes at 3.5 from the bottom
2. stamp the 2 sentiments and the 3 flowers 
3. colour the flowers using the blends
4. apply the adhesive sheeting to the 2 pieces need for the wishing sentiment
5. carry out the die cutting for all the elements needed
6. adhere the 2 squares to the boxes, then add the ledges using liquid glue
7. adhere the 2 flowers inside of the boxes at 2 different levels using liquid glue
8. attach the internal sentiment using dimensional pads
9. adhere the back of the florals in bloom layer to the front of the whispers of texture using liquid glue making sure you don't put glue where the boxes are
10. adhere the front top layer to hide the opening where the boxes are again not putting glue where the boxes are using liquid glue 
11. remove the backing from the white wishing and adhere to the petunia pop layer of the wishing, now remove the backing from the petunia pop layer and position on the front of the card 
12. attach the last sentiment using dimensional pads, leaving a gap for the flower to slot in
13. adhere the flower using liquid glue
14. place the dots 

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me. I'd love to hear form you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊 

Beautiful Gallery meets Everyday Arches and more

  Welcome to my blog

and  thank you for joining me today!

Happy Birthday Mick

level Intermediate - die cutting, dry embossing, layering, stamping

Materials required for this card are:

 

Bundles: delightful wishes

Card Stock: basic beige, secret sea,

Designer Series Paper: beautiful gallery

Dies: everyday arches (6,8)

Embossing Folders: mini corrugated

Ink: secret sea

Stampin' Blends: secret sea

Accessories: linen thread

when using layering dies (1) is the smallest

Start with a basic card base 14.5 x 21 scored at 10.5, beige layer 14 x 10, blue 9 x 12, dsp 7.5 x 11, linen thread 45cm (the last 10cm is needed for the faux bow at the front)

1. in the middle of the beige layer (landscape) stamp the sentiment and die cut it, then crop to sentiment required
2. dry emboss the beige layer
3. dye the linen thread using the stampin blend and cut off 10cm
4. wrap the rest around the beige layer so there are 2 strands at the front and secure at the back using tape
5. thread the rest through the 2 strands at the front and tie with a knot, then trim
6. adhere this to the base card using liquid glue
7. with both arch dies cut out the big arch (the smaller blue arch is not now needed)
8. die cut the dsp arch with the smaller die
9. attach the large open arch to the base card using dimensional pads 
10. Adhere the smaller arch using liquid glue inside the bigger arch

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me. I'd love to hear form you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊

Delightful Wishes meets Linked Together Dies

 Welcome to my blog

and  thank you for joining me today!

Happy Birthday Idwin

Intermediate - die cutting, dry embossing, layering, stamping

Materials required for this card are:

Bundles: delightful wishes

Card Stock: basic white, daffodil delight, lemon lolly, old olive, pecan pie

Dies: linked together

Embossing Folders: plaster painting 3D

Ink: old olive

Stampin' Blends: mossy meadow

Vellum: floral & gingham

Accessories: adhesive sheets, rhinestone basic jewels

 

Start with a base card 14.5 x 21 scored at 10.5, vellum 10 x 14, basic white 11 x 7, 3 x 9, daffodil delight 5 x 12, lemon lolly 5 x 9.5, 5 x 14, old olive 3 x 5.5 full leaves, 3 x 9.5 sentiment, 7 x 4 layering leaves, pecan pie 2 x 6

1. adhere the vellum to the base card using liquid glue
2. stamp the 2 full leaves and the hb sentiment 
3. die cut these along with the 3 full flowers and the larger layer for the layered leaves.
4. die cut the rest of the elements making sure there is adhesive sheeting on the back of the cs
5. adhere the lattice work to the base card
6. layer all the pieces that need to go together, adhere the top sentiment to the base card
7. adhere the flowers using glue dots
8. attach the hb sentiment using dimensional pads

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊