Smooth Sailing meets Itty Bitty Birthdays

Hi folks, thanks for dropping by, hope you like the card.

Happy Birthday Stuart!

You've joined me on a day where I'm using one of my favourite stamp sets. There are quite a few cards being made with this set just now.

I know it's his birthday today and his card says belated birthday, but he won't get his card until the middle of October, as he's away at sea just now. Hope the boys give him a good day!

I've case'd this one from Dena Rekow's web site thecreativitycave.com she does some fantastic video's (thanks Dena).

To recreate this card follow the guide below:
(cs) = Card Stock, (ss) = Stamp Set, DSP = Designer Series Paper,

All measurements are in Centimetres.

Card Stock: Pretty Peacock 2 pieces 4 x 9 (seaweed), 1.5 x 10.5 (trim)
Soft Sea Foam 4 x 9 (seaweed)
Soft Suede 2 pieces 21 x 14.8 (card base), 4 x 4 (helm)
Vellum  4 x 9 (seaweed)
Very Vanilla 2 pieces 10.5 x 5 (waves), 6 x 5 (sentiment)
DSP: Come Sail Away 10 x 14.3 (1st layer)
Stampin' Pads: Crumb Cake, Pretty Peacock
Accessories: Basic Rhinestones, Sail Away Trinkets


Start with the soft suede (cs) measuring 21 x 14.8, score and fold at 10.5, this is the card base.

Adhere the first layer sail away DSP using liquid glue.

Next you will need the bigger piece of very vanilla (cs)  and the narrow piece of pretty peacock (cs).  With the very vanilla piece tear a thin strip off along the 10.5 edge and then adhere the other edge to the pretty peacock strip.

Emboss this piece with the high sea's 3D folder (having the 3D embossing plate gives a lovely finish).

Sponge the top edge of the embossed piece with crumb cake ink.

Tie some of the braided linen thread around this where the two colours meet using a knot, then fray the ends, and adhere to the base card using dimensional pads.

Using the other piece of  very vanilla (cs)  stamp the sentiment using the itty bitty birthdays (ss) in pretty peacock.

It's now time to do the die cutting and all elements come from the smooth sailing die set.

You will need to run the foliage die through your machine 3 times, once for each of the colours: soft sea foam (cs), pretty peacock (cs) and vellum (cs), while doing one of them die cut the other 2 elements at the same time, the ship's wheel (helm) in soft suede (cs) and the Sentiment stamped earlier with the label.

Edge the sentiment label in pretty peacock ink.

Staggering the foliage adhere to the base card using little dabs of liquid glue, add the helm using a single glue dot then do the same for the sail away trinket.

I also placed a small basic rhinestone in the middle of the trinket.

Trim the braided linen thread if needed and jobs done!

Will be back again soon with more cards
Annette X

Perennial Birthday meets Sailing Home & Waterfront

Hello, so happy you've popped by.

Happy Birthday Gareth

I've used a nautical theme for this card,  because I'm really enjoying these new dies and cling stamps. They are so much better than our older one's.

To recreate this card follow the guide below:
® = retired, (sab) = Sale-A-Bration, (H) = Hostess, (nsu) = not stampin’ up, (ss) = Stamp set, (DSP) = designer series paper, (CS) = Card Stock

All measurements are in centimetres

Card Stock: Night of Navy: 21 x 14.5scored at 10.5 (card base)
Soft Suede: 3 pieces 10 x 14 (first layer), 12.5 x 1 (rope), 4 x 3 (Knot)
Whisper White: 8.5 x 6 9 (lighthouse)
Whisper White Thick: 9.5 x 12 (second layer)
Very Vanilla: 7 x 3 (sentiment)
DSP: Come Sail Away  9.5 x 5.5 (top), 9.5 x 8.5 (bottom)
Embossing Folders: Subtle
Dies: Smooth Sailing
Stamp Sets: Perennial Birthday, Sailing Home, Waterfront
Clear Blocks: E
Accessories: ® Candy Dots, Clear block E, Wink of Stella Clear

Ink up the Clear block with Balmy Blue ink, lightly spray with water and then stamp down onto the larger piece of Whisper White Thick (cs) and leave to dry (for quicker drying use a Heat Tool).
Stamp the Lighthouse on the smaller piece of Whisper White (cs) in Night of Navy.
Die cut the Lighthouse, along with the Rope and Knot using the two smaller pieces of  Soft Suede (cs).
Adhere the larger piece of DSP to the bottom of the first layer (soft suede) leaving an equal space on all three sides using liquid glue
Rotate round and do the same with the smaller piece of DSP (overlapping the bottom piece slightly).
Adhere the Rope across the join between the two pieces of DSP and trim down. (I used narrow tear & tape).
Adhere this layer to the base card using liquid glue.
Go back to the stamped Whisper White Thick (cs) and add some Birds across the top. then stamp the Sand in Crumb Cake towards the bottom.
Again tear all the sides off to give it a distressed look.
Add some Clear Wink of Stella to the sand.
Adhere the Lighthouse and Rope to this layer using dimensional pads.
Now attach to the base card using dimensional pads.
Stamp the Sentiment on the Very Vanilla (cs) using Night of Navy.
Now tear all the sides off to give it a distressed look, then lightly sponge all over using Crumb Cake.
Slightly bend the sentiment and add a Candy Dot to the top left corner.
Adhere to the card using dimensional pads.

Thanks for dropping by, will be back again soon with more cards!
Annette X

Sailing Home meets Perennial Birthday

Hello folks and welcome to my blog,

Happy Birthday Charles

I just love this new stamp set and dies, along with the Designer Series Papers.  It makes life much easier to make cards for men.

To recreate this card follow the guide below:
® = retired, (sab) = Sale-A-Bration, (H) = Hostess, (nsu) = not stampin’ up, (ss) = Stamp set, (DSP) = designer series paper, (CS) = Card Stock

All measurements are in centimetres

Card Stock: Soft Suede: 3 pieces,  27 x 13.5 scored at 13.5 (card base), 13.5 x 1 (long rope) and 4 x 3 (knotted rope)
Whisper White: 13.5 x 6.8
Very Vanilla: 7 x 3
DSP: Come Sail Away 13.5 x 6.8
Embossing Folders: Subtle
Dies: Smooth Sailing
Stamp Sets: Perennial Birthday, Sailing Home
Embellishments: ® Candy Dots 

Start with the panel of Whisper White (cs) and stamp the image of the yacht towards the bottom and the birds towards the top in Night of Navy.
Now emboss this panel using the Subtle folder and adhere down on the righthand side of the base card using liquid glue.
Now adhere the DSP panel down the lefthand side of the base card also using liquid glue.
Die cut the Rope and Knot using the two smaller pieces of  Soft Suede 
Adhere the Rope down the middle of the card (I used narrow tear & tape).
Add the Knot of Rope using mini dimensional.
Stamp the Sentiment on the Very Vanilla (cs) using Night of Navy.
Now tear all the sides off to give it a distressed look, then lightly sponge all over using Crumb cake.
Slightly bend the sentiment and then adhere to the base card using dimensional pads.
Add a Candy Dot to the sentiment.


Will be back again soon with more cards!
Annette X

Lilypad Lake meets Perennial Birthday

Hello everyone, and welcome to my blog

Happy Birthday Rob & Jack

Perennial Birthday seems to be my go to stamp set for the word birthday at the moment. Especially for male cards, I just love the font and size.

These two cards are the same except for the Enjoy sentiment, I couldn't decide which one to use so did one of each. I'm veering towards the red on white, which do you prefer?

It's quite an easy card to make (I don't do hard cards) ha ha!!

To recreate this card follow the guide below:
® = retired, (sab) = Sale-A-Bration, (H) = Hostess, (nsu) = not stampin’ up, (ss) = Stamp set, (DSP) = designer series paper, (CS) = Card Stock, with layered dies number 1 is the always the smallest.

All measurements are in centimetres

Card Stock: Night of Navy: 21 x 14.5 scored at 10.5 (card base)
Whisper White: 4 pieces, 14.3 x 10 (first layer), 4.5 x 3.5 (yachts only), 5.5 x 2 (sentiment), 6.5 x 6.5 (full scene)
Crushed Curry: 7 x 7
Silver Foil: 4 x 4
DSP: Come Sail Away 14.3 x 6
Ribbon: Flax 14.3
Embossing Folders: Subtle
Dies: Layering Circles, Lakeside, Smooth Sailing,  Stitched Shapes
Stamp Sets: Bella & Friends ®, Lilypad Lake, Perennial Birthday, Sailing Home
Stampin' Blends: Poppy Parade
Stampin' Pads: Balmy Blue, Crushed Curry, Night of Navy, Poppy Parade

Stamp the happy birthday in the top left corner of the Whisper White layer in Night of Navy.
Adhere the DSP about 0.5 from the bottom of the same layer using liquid glue.
Add the ribbon at the top of the DSP (half on half off), and adhere using tear n tape.
On the square of Whisper White,  stamp the waves at the bottom, then the yachts (don't worry about the overlay) and lastly the sun towards the top (make sure it's not too high up).
On the smallest piece of Whisper White stamp the Enjoy sentiment in Poppy Parade.
On the last piece of Whisper White stamp the yachts again, in Night of Navy and colour in the sails using the blends.
Place all items to be die cut on your plate together. Silver Ships Wheel, Crushed Curry scalloped circle No:6, yacht scene Stitched Shapes circle No: 3, banner, separate group of yachts.
Adhere the yacht scene to the scalloped circle using liquid glue then attach to the base card using dimensional pads.
Overlay the yachts using dimensional pads.
Adhere the banner to the Helm using liquid glue and attach to the base card using dimensional pads.

Will be back again soon with more cards!!

Annette X