Adventurous sky collection

Welcome to my blog

and  thank you for joining me today!

Happy Birthday Mike

Intermediate level - colouring with alcohol markers, die cutting, dry embossing, layering

Cased from Angie Leach 'too cool stamping'

Materials required for this card are:

Bundles: adventurous sky

Card Stock: night of navy

Designer Series Paper: take to the sky

Dies: *everyday details (4)

Embossing Folders: soft waves 3D

Ink: memento black, night of navy

Stampin' Blends: boho blue, gray granite, smoky slate

Accessories: *adhesive backed milky dots

 * = no longer available

Start with a base card 10.5 x 29 scored at 10.5, basic white 9 x 5, gray granite 9 x 9, 4 x 14.2, dsp 3.1 x 13.9, 7.5 x 10.1

1. dry emboss the the righthand side of the base card front
2. adhere the clouds dsp using liquid glue
3. adhere the blue dsp to the gray granite strip using liquid glue
4. adhere this to the base card using liquid glue
5. stamp the plane in black
6. colour the plane using the the blends
7. die cut the plane and circle
8. stamp the sentiment to the circle in night of navy
9. attach the plane to the circle using dimensional pads
10. adhere the circle to the base card using liquid glue
11. add a milky dot to the nose of plane

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊 

Simply Said meets Heartfelt Hexagon Punch

Welcome to my blog

and  thank you for joining me today!

Happy Birthday Nigel

Easy level - dry & heat embossing, layering, using a punch

Materials required for this card are:

Card Stock: basic grey & white

Designer Series Paper: take to the sky

Embossing Folders: plaster paintings 3D

Embossing Powder: black

Ink: versaMark

Punches: heartfelt hexagon

Stamps: simply said

Accessories: bakers twine essentials pack, *black rhinestones 

 * = no longer available

Start with a base card 14.5 x 21 scored at 10.5, layer one 14.1 10.1, black rectangle 2.5 x 14.1 small rectangles 3.5 x 8.5 (3), dsp rectange2 x 14.5 smaller rectangles 3 x 8 (3), white 6.5 x 5.5

1. dry emboss the first layer using the plaster paintings folder and adhere to the base card using liquid glue
2. adhere the dsp strips to the black rectangles using liquid glue
3. adhere all the rectangles to the base card using liquid glue
4. stamp the sentiment using versaMark, add the black embossing powder and heat
5. punch out the sentiment 
6. wind some black bakers twine and attach to the middle rectangle using stampin' seal
7. attach the sentiment using dimensional pads
8. add the rhinestones.

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊 

Simply Said meets Heartfelt Hexagonal punch

 Welcome to my blog

and  thank you for joining me today!

Happy Birthday Andy

Easy level - dry embossing, heat embossing, layering, stamping 

Materials required for this card are:

Card Stock: basic white. smoky slate

Designer Series Paper: take to the sky

Embossing Folders: *subtle 3D

Embossing Powder: black

Ink: versaMark

Punches: heartfelt hexagon

Stamps: simply said

Accessories: neutrals sequins, *stithced satin ribbon

 * = no longer available

Start with a base card 14.5 x 21 scored at 10.5

• basic white 14.5 x 5, 8 x 8
• basic black 7.5 x 7.5
• dsp 14.5 x 5, 7 x 7
• smoky slate 14.5 x 10.5

1. dry emboss the smoky slate and adhere to the base card using liquid glue
2. punch out a hexagon from the centre of the black square
3. In the middle of the white square stamp the sentiment in versaMark, cover with black embossing powder and heat set
4. punch out using the hexagon
5. layer the 2 rectangle strips using liquid glue
6. dry emboss the 8 x 8 white square
7. layer the 3 squares using liquid glue
8. adhere these 2 pieces to the base card using liquid glue
9. cut the black hexagon in half and adhere to the white one top and bottom using liquid glue
10. using sticky tape adhere the ribbon behind the sentiment and attach the card using dimensional pads
11. add the sequins               

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊

Adventurous Sky Slider Card

Welcome to my blog

and  thank you for joining me today!

Happy Birthday Mike

Cased from a tube video my Rachael Merrick

Intermediate level - die cutting, layering, stamping

Materials required for this card are:

Bundles: adventurous sky

Card Stock: basic white, real red, silver foil

Designer Series Paper: take to the sky's

Dies: *layering circles (7), *banners (1)

Ink: boho blue, real read

punches: heartfelt hexagon

Stamps: *day to celebrate

Accessories: aqua painter

 * = no longer available, when using layering dies (1) is the smallest

Start with a base card 14.5 x 21 scored at 1, 5 & 15, white pieces 9.2 x 14,  2.54 x 6, 9 x 7.5, 2.5 x 5, dsp 9.6 x 14.1, silver 7.5 x 7.5

1. with the white 9 x 7.5 stamp the plane and clouds, and add a little shading using an aqua painter
2. on the  2.5 x 5 piece stamp the banner sentiment 
3. die cut the plane, clouds and banner and foil circle
4. adhere the dsp to the centre panel using liquid glue
5. cut a slot of about 11cm, 2 thirds of the way down the central panel
6. make a notch on the right hand side the punch, then close the card and make a corresponding one on the back side
7. using the 9.2 x 14 piece stamp the internal sentiment and plane on the right hand side 
8. score the 2.54 x 6 in half, and slot it into the slit on the left hand side
9. adhere the circle to the half showing on the front using liquid glue
10. flip it over and do the same with the internal sentiment (make sure the mechanism works)
11. close the card up and adhere it down using the 1cm score mark for the liquid glue
12. adhere the clouds using liquid glue
13. attach the banner and plane with dimensional pads

I wanted my card to stand up so I cut a piece of real red cs 6 x 14.5 scored at 1cm,

then punched the notch and adhered it the back of the card.

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊 

Adventurous Sky and more

 Welcome to my blog

and  thank you for joining me today!

Happy Birthday Simon

Intermediate level - colouring with alcohol markers, die cutting, dry embossing, layering, stamping

Materials required for this card are:

Bundles: adventurous sky

Card Stock: basic white, copper clay

Designer Series Paper: take to the sky

Dies: everyday details (3)

Embossing Folders: so swirly

Ink: memento tuxedo black

Punches: happy labels

Stampin' Blends: balmy blue, copper clay grey granite, color lifter

Stamps: simply said

Accessories: 23.5 color dots

when using layering dies (1) is the smallest

1. Start with a base card 14.5 x 21 scored at 10.5, white layer 14.5 x 10.5, copper layers 6 x 14.5, 5.5 x 10.5, dsp 5.5 x 14.5, 5 x 10.5, white for circle, sentiment & plane
2. dry emboss the white layer using the folder, then adhere to the base card using liquid glue
3. adhere the pieces of dsp to the copper backings using liquid glue, then adhere to the base card
4. stamp the sentiment and plane, then colour the plane using the blends
5. use the punch to crimp each end of the sentiment
6. die cut the circle and plane
7. dry emboss the circle
8. attach these three elements using dimensional pads
9. add the colour dots

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊

Adventurous Sky and more

 Welcome to my blog

and  thank you for joining me today!

Happy Birthday Stuart

Used a card template for this one - die cutting, dry embossing, layering, stamping

Materials required for this card are:

Bundles: adventurous sky

Card Stock: basic white thick, night of navy, smoky slate

Designer Series Paper: take to the sky

Dies: deckled rectangles (3,4), mini alphabet

Embossing Folders: exposed brick 3D, painted texture 3D

Ink: night of navy, smoky slate (stamped off)

Accessories: neutral sequins

 

when using layering dies (1) is the smallest

1. Start with a base card 14.5 x 21 scored at 10.5, first layer 14.1 x 10.1, dsp layer 13.7 x 9.7, card strips 2.5 x 13, dsp strips 2.1 x 12.6, night of navy off cut & basic white off cut for rectangles, letters, sentiment & plane
2. dry emboss the dsp layer and adhere to the 1st layer
3. adhere the first layer to the base card using liquid glue
4. adhere the dsp strips to the card strips and then adhere these to the base card using liquid glue
5. stamp some clouds on white card using the stamping off method
6. stamp the sentiment and plane 
7. add some adhesive sheet to the back of a piece of white card for the letters
8. die cut all the elements
9. dry emboss the white rectangle
10. place the letters
11. adhere the two rectangles together, then adhere to the base card using liquid glue
12. attach the plane and sentiment using dimensional pads
13. add the sequin

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊