He's All That bundle meets Delightful Wishes

Welcome to my blog

and  thank you for joining me today!

Happy Birthday Stuart

Intermediate level - die cutting, dry embossing, layering, lining up stamping 

Materials required for this card are:

 

Card Stock: basic beige, secret sea

Designer Series Paper: *he's the man

Dies: *all that, mini alphabet

Embossing Folders: *dashing designs

Ink: secret sea

Stamps: delightful wishes, *he's all that

Accessories: 25/7 in color flat pearls, *bordered ribbon

 * = no longer available

Start with a base card 14.5 x 21 scored at 10.5, secret sea 10 x 14, dsp 10 x 8.5, off cuts for die cutting

1. dry emboss the top 5.5 cm of the blue layer
2. adhere the dsp below the embossed area using liquid glue
3. attach the ribbon using tape and adhere to the base card using liquid glue
4. add adhesive sheeting to the back of the card for the diamonds and letters
5. die cut all the pieces
6. stamp the 2 sentiments onto the label and attach to the card using dimensional pads
7. attach the diamonds and letters
8. add the pearls

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details of how to order.

 

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😊 

No Stamping Card

   Welcome to my blog

and  thank you for joining me today!

Happy Birthday Gareth

Quick and easy - DSP and die cutting

Materials required for this card are:

Card Stock: basic black, basic white, *mango melody 

Designer Series Paper: *he's the man

Dies: wanted to say

Accessories: *faux suede trim, *matte black dots

 * = no longer available

1. Start with a base card 29.7 x 10.5 scored at 14.85, dsp 10 x 8.5, 10 x 6.5, basic black 9 x 5, mango melody 8 x 4.5 (apply adhesive sheet to the back of this piece)
2. adhere the 2 pieces of dsp leaving an even border (they will overlap in the middle)
3. adhere the trim across the middle using tear & tape
4. attach the 2 pop outs from the dsp pack in bottom section using dimensional pads
5. die cut the two happy birthday's (inner & outer), remove the backing from the adhesive sheet and attach to outer happy birthday
6. Use dimensional pads to attach the happy birthday to the card
7. add the matte dots below the front wheel of the car

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details on how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😘

He's All That for this man

  Welcome to my blog

and  thank you for joining me today!

Happy Birthday Jim

This is a simple card to make using the He's all that stamping set

Materials required for this card are:

Card Stock: early espresso, very vanilla

Designer Series Paper: *he's the man

Dies: all that

Embossing Folders: *subtle 3D

Ink: memento tuxedo black

Stamp Sets: he's all that

 * = no longer available

1. Start with a base card 10.5 x 29 scored at 14.5, early espresso 8 x 12, dsp 7.5 x 11.5, off cut very vanilla for stamping
2. stamp the sentiment and put to one side
3. emboss the early espresso rectangle
4. adhere the dsp to the early espresso using liquid glue
5. now adhere the early espresso to the base card using liquid glue
6. die cut the sentiment and attach using using dimensional pads 

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details on how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😘

He's The Man and more

  Welcome to my blog

and  thank you for joining me today!

Happy Birthday Thomas

I've used a mixture of old and new for this card, it's nothing like what I had in mind but l'm pleased with the finished article.

Materials required for this card are:

Card Stock: basic white, early espresso, soft succulent

Designer Series Paper: he's the man

Dies: all that, deckled rectangles (3), layering circles (3)

Embossing Folders: gingham

Ink: soft succulent

Stamp Sets: peaceful moments

Accessories: *candy dots, faux suede trim

 

* = no longer available, when using layering dies (1) is the smallest

1. Start with with a base card of 14.5 x 21 scored at 10.5
2. Layer 1 - 10.1 x 14.1 emboss this layer then add the suede trim towards the bottom (this was done using tear n tape)
3. adhere to the base card using liquid glue
4. stamp the happy birthday
5. die cut the rectangle, deckled circle and the happy birthday circle
6. cut the dsp to fit just inside the deckled rectangle 
7. adhere the happy birthday and dsp onto their backgrounds using liquid glue
8. attach all elements onto the card using dimensionals, then add the candy dots (or something similar)

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details on how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😘

Alphabest meets He's That Man Suite

  Welcome to my blog

and  thank you for joining me today!

Happy 40th Birthday Stuart

Hopefully he like's this one, VW camper vans are his thing at the moment and he would like to get one one day. Here's hoping his dream comes true.

Materials required for this card are:

Card Stock: basic white thick, early expresso, sahara sand

Designer Series Paper: He's the man

Dies: all that, *curvy

Embossing Folders: *bark 3D

Ink: soft succulent, sahara sand

Punches: best label, *1¾ circle

Stamp Sets: alphabest, *make a difference

* = no longer available

1. Base card 14.5 x 10.5, plain mat and dsp mat are both 4cm smaller all round (for our US friends ⅛ inch)
2. to create the road (l used the curve with dots from the curvy dies and cut the dots off)
3. Die cut the wavy circle, punch out a 1¾ inch circle
4. Emboss both the punched circle and the road
5. stamp the letters and numbers (I stamped the background first followed by the letters) then punched them out.
6. The VW van is one of the pop outs from the dsp.
7. I used glue to adhere the road and circles then stampin' dimensions for the rest.

Hope you liked today's card. If you would like more information on how to make it, please don't hesitate to contact me, I'd love to hear from you.

If you wish to buy any of the items used, go to contacting me at the top of the page for details on how to order.

Will be back again soon with more cards, in the meantime take care and have a great day.

Annette 😘